Getting An RV Tow Vehicle – Part 5. Towing Equipment Installed… and DONE! (Photos)
The installation process for getting all the flat-tow hardware installed on the CR-V. I hired it done. Here’s how it worked out (with photos).
Getting An RV Tow Vehicle – Part 4. Final Decisions And Purchases
After talking to several hitch installers in the area, I made the final decisions on the hardware to flat-tow my CR-V behind the RV. Here’s what I bought, and how I saved about $600 doing it.
Getting An RV Tow Vehicle – Part 3. Researching and Deciding On Flat-Tow Equipment
With a 2012 Honda CR-V as my future tow vehicle (or “toad”), it was now time to figure out how to prep it up for towing. So, we enter the research phase. Here’s the options I found and where I’m currently leaning…
Getting An RV Tow Vehicle – Part 2. Tow Dolly or Flat-Tow “4 Wheels Down”?
Do we got the cheaper route and put our car on a tow dolly? Or spend the extra money and flat tow with all 4 wheels down? Here is the point-by-point comparison.
Getting An RV Tow Vehicle – Part 1. To Tow or Not To Tow?
There is always that decision at the beginning: Tow a car or just keep it simple and leave it behind? Here’s how we arrived at our decision…